After using the automatic concrete feeding mixer for a period of time, we often encounter the blockage of the feeding port. Today, we will teach you how to deal with the blockage of the feeding port?

1．在每天收工时将混凝土贮罐及进出料口周围彻底清洗，自动上料搅拌车的清洗要点保证不粘有水泥及混凝土结块；注意在每次装料前都要用水冲洗进料口，这样可以使使进料口在装料时保持湿润。

1. Thoroughly clean the concrete storage tank and the area around the inlet and outlet at the end of each day. The key points for cleaning the automatic feeding mixer truck shall ensure that there is no cement and concrete caking; Note that the feed inlet shall be flushed with water before each loading, so as to keep the feed inlet wet during loading.

2．在装料的同时将随车自带的清洗用水水箱中注满水；在装料后冲洗进料口，洗净进料口附近残留的混凝土；到工地卸料后，冲洗出料槽，然后向混凝土贮罐内加清洗用水30—40 L；在车辆回程时保持混凝土贮罐正向慢速转动；下次装料前切记放掉混凝土贮罐内的污水。

2. While loading, fill the water tank with water for cleaning that is provided with the vehicle; Flush the feed inlet after loading, and clean the residual concrete near the feed inlet; After unloading at the construction site, flush the discharge chute, and then add 30-40 L of cleaning water to the concrete storage tank; Keep the concrete tank rotating slowly in the forward direction during the vehicle return; Remember to drain the sewage in the concrete storage tank before the next loading.

3.自动上料搅拌车进料口给料量是否合理：正确的方式是物料在吸料口和空气形成一定的气物混合比，在气流的推动下均匀流入上料机。这个时候我们需要将料枪设计带有补气功能。如果物料积压时间过长可能很硬，这个时候需要在料枪上装一个振荡器，敲碎结块的物料。

3. Whether the feeding amount at the feeding port of the automatic feeding mixer is reasonable: the correct way is to form a certain mixture ratio of air and material at the suction port, and the material will flow into the feeder evenly under the promotion of the air flow. At this time, we need to design the charging gun with the air supplement function. If the material is overstocked for a long time, it may be very hard. At this time, an oscillator needs to be installed on the material gun to break the caked material.

以上就是为大家介绍的有关全自动自上料搅拌车详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jufengjiaobanji.com/

The above is a detailed introduction to the fully automatic self loading mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.jufengjiaobanji.com/