In recent years, the construction of national road projects has become increasingly perfect, and there are more and more road construction projects in various provinces and cities across the country. The pothole road situation is also a great test for the chassis of flat car. As the saying goes, "the bottom is rotten before the car is rotten", it is inevitable that we will drag the bottom when driving the automatic feeding concrete mixer, so the protection of the chassis of the automatic feeding mixer is very important.
不少车主新购平板车后,只顾着为爱车贴膜、封釉、铺地胶等,却很少人会考虑到为自动上料搅拌车的底盘采取一些保护措施。保护了自动上料搅拌车的底盘才能能确保车辆操作驾驶和车主的安全。
After buying a new flat car, many car owners only focus on coating, glazing and floor glue for their car, but few people will consider taking some protective measures for the chassis of the automatic feeding mixer. Only by protecting the chassis of the automatic loading mixer can the vehicle operation and driving and the owner's safety be ensured.
很多人在使用自动上料混凝土搅拌车的过程中都忽视了对底盘的检修和保养的工作,其实根据众多的自动上料搅拌车使用者的反应,由于没有及时的对地盘进行检查而导致后期的故障总是很多,外表看起来光艳照人,而底盘早已经锈蚀斑斑,漏洞百出,
Many people neglect the overhaul and maintenance of the chassis in the process of using the automatic feeding concrete mixer. In fact, according to the reaction of many users of the automatic feeding mixer, there are always many late failures due to the lack of timely inspection of the site. The appearance looks bright, while the chassis has long been rusted and full of holes,
这主要有以下几个原因:夏日地表的烘烤,平日雨水的侵袭以及大气中的潮气、盐分等都会侵蚀车底,导致车辆提前老化.路上各种砂石不断撞击汽车底盘与轮毂等部位,使出厂时底盘上所固有的防锈漆和镀锌层很快就会被破坏,从而让金属裸露在外,与水分接触后导致氧化生锈.因此自动上料搅拌车的底盘也要经常做一下保养。
This is mainly due to the following reasons: the baking of the ground in summer, the invasion of rain on weekdays and the moisture and salt in the atmosphere will erode the bottom of the vehicle, resulting in the early aging of the vehicle. All kinds of sand and stones on the road constantly hit the chassis and wheel hub, so that the inherent antirust paint and zinc coating on the chassis will be damaged soon when leaving the factory, so that the metal will be exposed, Contact with water will lead to oxidation and rust. Therefore, the chassis of automatic feeding mixer truck should also be maintained frequently.