Configuration quantity

根据相关法规要求，混凝土搅拌车在装载混凝土时的时速不得大于50km/h，且从装料完成到卸料结束的时间不得大于1.5h。由此可以得出，混凝土搅拌运输车的作业半径不得大于70km。根据各搅拌站的工程量大小，需要配置相应数量的混凝土搅拌运输车。

According to relevant regulations, the speed of concrete mixer truck when loading concrete shall not be greater than 50km / h, and the time from loading to unloading shall not be greater than 1.5h. It can be concluded that the operation radius of concrete mixer truck shall not be greater than 70km. According to the quantities of each mixing plant, a corresponding number of concrete mixing trucks shall be configured.

罐体的装载容量

 Loading capacity of tank

目前国内生产的混凝土搅拌车装载容量主要有6m3、8m3、9m3、10m3、12m3和15m3等6种规格，其中10m3搅拌运输车是目前市场上销售量较大的一种。随着配备3m3搅拌主机的混凝土搅拌站的兴起，12m3和15m3混凝土搅拌运输车也越来越受用户的青睐。由于15m3混凝土搅拌运输车的底盘是8X4驱动形式，转弯半径较6×4底盘的大，不适合在城区施工。因此装在6×4底盘上的10~12m3混凝土搅拌运输车已成为市场的主流产品。

At present, the loading capacity of domestic concrete mixer truck mainly includes 6m3, 8m3, 9m3, 10m3, 12m3 and 15m3, of which 10m3 mixer truck is one with large sales volume in the market. With the rise of concrete mixing plants equipped with 3m3 mixing machines, 12m3 and 15m3 concrete mixing trucks are more and more favored by users. As the chassis of 15m3 concrete mixer truck is 8x4 driven, the turning radius is 6 × 4. The large chassis is not suitable for construction in urban areas. Therefore, it is installed in 6 × 4. The 10 ~ 12m3 concrete mixer truck on the chassis has become the mainstream product in the market.

车辆底盘

 Vehicle chassis

混凝土搅拌车使用的专用底盘是混凝土搅拌运输车价格组成中成本较高、使用中维护费用较高的部分。混凝土搅拌运输车的汽车底盘分为进口底盘和国产底盘两类。进口底盘在性能、舒适性、可靠性及排放标准等方面优于国产底盘，而国产底盘在价格、服务网点方面有较大优势。对于底盘，主要看该底盘的发动机功率和扭矩、油耗、轮胎、车架、驾驶舒适性及排放标准等方面。

The special chassis used by concrete mixer truck is the part with high cost and high maintenance cost in the price composition of concrete mixer truck. The truck chassis of concrete mixer truck is divided into imported chassis and domestic chassis. Imported chassis is superior to domestic chassis in performance, comfort, reliability and emission standards, while domestic chassis has great advantages in price and service network. For the chassis, it mainly focuses on the engine power and torque, fuel consumption, tires, frame, driving comfort and emission standards of the chassis.

液压传动件
 Hydraulic transmission parts

混凝土搅拌车由于工况恶劣，所以对液压传动件的质量、可靠性要求相当高，如果正在施工时出现故障，维修比较麻烦。甚至有可能造成混凝土在搅拌罐内凝固，罐体报废的严重故障发生。目前液压传动系统市场上有两种配置：一种是分体式配置，由液压泵、液压马达、散热器和减速机组成，该配置成熟可靠，维修方便；另一种是三合一式配置，由液压油泵、三合一减速机组成，该配置集成度高，安装方便，外形美观，但由于液压系统用油与减速机用油是同一种油品，很容易造成油品的污染，从而对液压油泵造成损坏

Due to the poor working conditions, the concrete mixer has high requirements for the quality and reliability of hydraulic transmission parts. If there is a fault during construction, the maintenance is troublesome. It may even cause the concrete to solidify in the mixing tank and the tank body to be scrapped. At present, there are two configurations of hydraulic transmission system in the market: one is split configuration, which is composed of hydraulic pump, hydraulic motor, radiator and reducer. The configuration is mature, reliable and convenient for maintenance; The other is a three in one configuration, which is composed of hydraulic oil pump and three in one reducer. This configuration has high integration, convenient installation and beautiful appearance. However, because the oil used in the hydraulic system is the same as that used in the reducer, it is easy to pollute the oil and damage the hydraulic oil pump