Generally speaking, vehicle equipment such as self loading mixers have a layer of paint on their surface, which is designed to provide better protection and aesthetic appearance for the vehicle. During normal operation, the paint is easily damaged, so this is a method of protecting the paint from damage from the self loading mixer. If you do not like the painted surface of the self priming mixer, the metallic paint will crack very little and continue to penetrate into the paint layer until it penetrates into the entire paint layer.

如果裂缝中含有蜡，则身体会变得斑纹。定期打蜡可以逐渐减少裂纹。当暴露在阳光下时，自上料搅拌机会不断蒸发，以保护空气中的油。随着时间的流逝，油漆油将变得过度分散。涂漆表面的亮度和深度将大大降低，涂漆表面将逐渐变白，将形成氧化层，并缩短涂层寿命。如果自动进料混合器的涂漆表面被严重氧化，则可以通过研磨和抛光进行处理。同时尽量把自上料搅拌机停放在车库内，停车的时候不要有强阳光暴晒，减少雨淋。

If the cracks contain wax, the body can become mottled. Regular waxing can gradually reduce cracks. When exposed to sunlight, the self feeding mixer continuously evaporates to protect the oil in the air. Over time, the paint oil will become excessively dispersed. The brightness and depth of the painted surface will be greatly reduced, and the painted surface will gradually become white, forming an oxide layer, and shortening the coating life. If the painted surface of the automatic feed mixer is severely oxidized, it can be treated by grinding and polishing. At the same time, try to park the self loading mixer in the garage. When parking, do not expose it to strong sunlight to reduce rain.

自上料搅拌机的表面磨损。它可能是由昆虫，禽粪，树液，柏油或沥青引起的。一些小的蚀刻可以通过研磨和抛光解决。除了上述方法之外，为了有效地防止油漆溅到车辆上，在驾驶时必须注意驾驶此外使用后注意紧固件是否松动，并及时紧固。所有搅拌机均采用工作通道，紧固件应及时检查。

The surface of the self feeding mixer is worn. It may be caused by insects, bird droppings, tree sap, tar, or asphalt. Some small etchings can be solved by grinding and polishing. In addition to the above methods, in order to effectively prevent paint from splashing onto the vehicle, attention must be paid to driving. In addition, after use, attention must be paid to whether fasteners are loose and tightened in a timely manner. All mixers are equipped with working passages, and fasteners should be inspected in a timely manner.

搅拌机减速箱使用一段时间后，检查其润滑油位的凹凸情况，并及时补偿查询孔处可见的油质为30#的机械油。润滑油是机械设备的重要组成部分。如果润滑油没有及时补偿，可能会导致传动部件磨损，因此必须及时检查润滑油。并避免碰撞和摩擦。否则，会发生其他损坏。

After using the mixer reducer for a period of time, check the concavity and convexity of its lubricating oil level, and promptly compensate for the 30 # mechanical oil visible at the inquiry hole. Lubricating oil is an important component of mechanical equipment. If the lubricating oil is not compensated in time, it may lead to wear of transmission components, so it is necessary to check the lubricating oil in a timely manner. And avoid collisions and friction. Otherwise, other damage may occur.

更多的关于自动上料混凝土搅拌车问题或者详细的内容，请进入我们公司的网站：http://www.jufengjiaobanji.com网站中会有很多的内容仅供参考。

For more questions or detailed information about automatic loading concrete mixer trucks, please visit our company's website: http://www.jufengjiaobanji.com There will be a lot of content on the website for reference only.