The high temperature problem of automatic feeding mixer has great harm, which needs attention. Especially in summer, many machines are prone to high temperature problems. How to avoid the high temperature hazard of automatic feeding mixer? The editor summarized the following points:

1、防止发动机机体过热：由于环境温度比较高，因此发动机容易过热，要加强对发动机冷却系统的检查、保养，这包括水箱、节温器、水泵、风扇等部件的检查，并且要注意及时加注冷却水。当水温超过100℃时，应在阴凉处停车降温，让发动机怠速运转，并掀开发动机罩帮助散热。

1. Prevent the engine body from overheating: due to the high ambient temperature, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of the engine cooling system, including the inspection of water tanks, thermostats, water pumps, fans and other components, and pay attention to the timely filling of cooling water. When the water temperature exceeds 100 ℃, stop in a cool place to cool down, let the engine idle, and lift the hood to help dissipate heat.

2、防止车漆受损：车漆经过强烈的阳光曝晒，会发旧、起皱，而普通的美容打蜡虽然可以起到一定的防晒效果，但由于任何车蜡都含有矽的成分，久经紫外线照射会锈蚀车漆，留下点点黑斑。车蜡本身起不到增强硬度、抗紫外线的作用，反而会因温度过高而很快流失，停车时要注意尽量把车停放在阴凉处。

2. Prevent the car paint from being damaged: the car paint will get old and wrinkled after being exposed to strong sunlight. Although ordinary beauty waxing can have a certain sunscreen effect, because any car wax contains silicon, it will rust the car paint after a long time of ultraviolet radiation, leaving a little black spots. The car wax itself can't enhance hardness and resist ultraviolet rays, but will quickly lose due to high temperature. When parking, you should pay attention to parking the car in a cool place as far as possible.

3、防止车胎爆裂：气温高所以比较容易爆胎，温度过高时很容易使轮胎变形，抗拉力下降。而作为轮胎本身，气压不标准、轮胎老化、性能减弱，或者在行驶过程中轮胎轧到了坚硬的金属或其他硬物等情况，都会导致汽车突然间爆胎。

3. Prevent tire burst: high temperature makes it easy to burst. When the temperature is too high, it is easy to deform the tire and reduce the tensile resistance. As for the tire itself, the non-standard air pressure, aging of the tire, weakening of performance, or the tire rolling into hard metal or other hard objects during driving will cause the car to burst suddenly.

4、防止刹车制动失灵：制动液在高温环境中更容易蒸发汽化，在制动管路中形成气阻，制动蹄片也容易烧蚀，造成制动失灵。所以要经常检查调整制动系统，下长坡途中应注意停车晾刹，保证制动性能良好。如果发现制动毂发烫，应停车降温，但不可浇泼冷水，以防制动毂破裂。

4. Prevent brake failure: the brake fluid is easier to evaporate in high temperature environment, forming air resistance in the brake pipeline, and the brake shoes are also easy to be ablated, causing brake failure. Therefore, check and adjust the braking system frequently. Pay attention to parking and braking on the way down a long slope to ensure good braking performance. If the brake hub is found to be hot, stop and cool down, but do not pour cold water to prevent the brake hub from cracking.

以上就是为大家介绍的有自上料混凝土搅拌罐车的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jufengjiaobanji.com/

The above is a detailed introduction to the self loading concrete mixing tank truck. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.jufengjiaobanji.com/