In our life, concrete mixer is a special vehicle for transporting concrete. Large tanks are usually installed at the rear of the vehicle to mix concrete. However, as we need to clean the concrete inside the vehicle in long-term use, let's introduce the following specific cleaning methods.

1.准备应急驱动软管，关闭搅拌车，并卸下液压马达上的高压油管接头。

1. Prepare the emergency drive hose, close the mixer, and remove the high-pressure oil pipe connector on the hydraulic motor.

2.拆下高压油管，并用我们的应急驱动软管将其连接到故障汽车上的相应接头。

2. Remove the high-pressure oil pipe and connect it to the corresponding connector on the faulty vehicle with our emergency drive hose.

3.对于发动机搅拌车，将其控制手柄转到卸料位置以卡车内的混凝土。

3. For the engine mixer, turn its control handle to the unloading position to remove the concrete in the truck.

4.应急驱动器完成后，卸下驱动器软管并将车辆恢复到原始状态。

4. After the emergency drive is completed, remove the drive hose and restore the vehicle to its original state.

每个人都必须已经知道清洁混凝土搅拌车内部混凝土的方法。为了防止设备在使用过程中由于某些故障而影响设备的正常运行.

Everyone must already know how to clean the concrete inside the mixer truck. In order to prevent the normal operation of the equipment from being affected by some faults

自动上料混凝土搅拌车广泛适用于住宅建筑、乡村修路、修建广场、车间……等路面比较窄的硬化施工作业的专用车辆。它可以集上料、搅拌于一体，可以智能配料上料，又能自己装载搅拌，是真正的一体机。小巧、灵活、省时省力省场地！而且自动上料混凝土搅拌车让操作更加简单，具体如下。

Automatic feeding concrete mixer is widely used in residential buildings, rural road construction, square construction, workshop and other narrow road hardening construction operation. It can be set feeding, mixing in one, can be intelligent ingredients feeding, but also their own loading mixing, is a real all-in-one machine. Compact, flexible, time-saving, labor-saving and site saving! And the automatic feeding concrete mixer makes the operation more simple, as follows.