The motor is the power source of the self loading mixer, and the quality of the motor also determines whether the mixer can work for a long time. Maybe you encounter the motor heating when using the self loading mixer. Yes, that's right. After working for a long time, the motor will also dissipate heat and generate heating. In addition, the serious heating of the motor after the use of the self loading mixer is mainly caused by the following two reasons:

一、电机绕组热量散发多，没能及时通过外壳散发掉。

1、 The heat of the motor winding is dissipated too much and cannot be dissipated through the shell in time.

二、电机外壳散发热量的能力较差。

2、 The ability of the motor shell to dissipate heat is poor.

这两种因素都可能造成自上料搅拌车的电机热量太大而导致电机被烧毁。这两种因素造成电机过热其根本原因在于：

These two factors may cause too much heat from the motor of the charging mixer and cause the motor to be burned. These two factors cause motor overheating. The root causes are:

一、自上料搅拌车电机绕组产热太多，其根本问题是在于电机导线非纯铜导线所导致的，纯铜导线导电能力强，电阻小，因此产热少，如果其他材质导线电机工作时电阻大产热多；

1、 The motor winding of the self feeding mixer produces too much heat. The fundamental problem is that the motor conductor is not a pure copper conductor. The pure copper conductor has strong conductivity and low resistance, so it produces less heat. If the conductor of other materials has high resistance when the motor works, it produces more heat;

二、自上料搅拌车作业后电机外壳散热的能力差，根本问题在于外壳是非纯铝材质。合金铝不但质量轻，而且散热的能力更强，采用其他材质作为电机外壳，散热的能力不如铝材质。

2、 Since the operation of the feeding mixer, the heat dissipation capacity of the motor shell is poor. The fundamental problem is that the shell is made of non pure aluminum. Aluminum alloy not only has light weight, but also has stronger heat dissipation capacity. Using other materials as motor shell, the heat dissipation capacity is not as good as aluminum.

本文由全自动自上料搅拌车为您提供，我们的网站是：http://www.jufengjiaobanji.com/我们将以全心全意的热情为您提供服务，欢迎您的访问

This article is provided for you by the automatic self loading mixer. Our website is: http://www.jufengjiaobanji.com/ We will serve you with wholehearted enthusiasm. Welcome to visit