1. This phenomenon is mainly due to the following reasons: concrete mixer overload, concrete mixer overload can cause its own load is too large, the mixing speed of mixing shaft becomes slow, resulting in the mixing effect of mixer is reduced.

2.全自动自上料搅拌车非常容易出现停转或过负损坏现象，第二，搅拌叶片与侧叶片与罐内壁间有大的异物，搅拌机在搅拌的过程中非常容易出现异物卡塞现象。

2. The concrete mixer is very easy to stop running or over negative damage. Secondly, there are large foreign matters between the mixing blade and the side blade and the inner wall of the tank, which makes it easy for the mixer to jam during the mixing process.

3.当较大的异物处于搅拌叶片或侧叶片与罐内壁之间时，两者正常运转非常容易受到限制，出现停滞现象，或侧叶片与罐内壁间隙过大时这种现象发生率非常高。

3. When the large foreign matter is between the mixing blade or the side blade and the inner wall of the tank, the normal operation of the two is very easy to be restricted and stagnant, or when the clearance between the side blade and the inner wall of the tank is too large, the occurrence rate of this phenomenon is very high.

4.全自动自上料搅拌车在使用的过程中非常容易出现电机胶带震动松动现象，这种松动导致全自动自上料搅拌车的传输动力大打折扣，造成无法完成负荷搅拌操作。

4. In the process of using the concrete mixer, it is very easy to loose the motor belt vibration, which leads to the transmission power of the concrete mixer greatly reduced, resulting in the failure to complete the load mixing operation.

5.在对搅拌叶片与侧叶片与罐内壁间有大的异物进行处理的过程中，操作人员要对出现的摩擦声进行分析，当出现尖锐、刺耳声音时要及时停止，对搅拌机进行停机检查，观察故障位置，对异物进行清理。

5. In the process of handling the large foreign matters between the mixing blade and the side blade and the inner wall of the tank, the operator shall analyze the friction sound, stop the mixer in time when there is sharp and harsh sound, stop the mixer for inspection, observe the fault position and clean up the foreign matters.

本文由搅拌机整理发布，您是不是对这些内容有所了解了呢?更多的内容请点击：http://www.jufengjiaobanji.com我们会有更多精彩内容等你查看。

This article is organized and released by Zhongke Jufeng mixer. Do you have any understanding of these contents? For more information, please click: http://www.jufengjiaobanji.com We'll have a lot more to see.